2" HIGH LIFTER Signature Series 2" Lift Kit - PLK800R-50

2" HIGH LIFTER Signature Series 2" Lift Kit - PLK800R-50

Hardware included:

Yes

Number:

PLK800R-50

$229.99*

- +

Available online only

Hurry! Only 2 left in stock!

Caution : Kimpex Canada ONLY sells and ships in Canada.

*Prices displayed on this web site are exclusive for online orders and might be different in store.

Part number :214399
high-lifter
Bigger. Badder. BOLDER. Take your ATV/UTV to the edge with High Lifter’s 2” Lift Kit. Increase your ground clearance and make room for larger tires to dig deep and ride hard in most any terrain. Our engineers and staff have spent over 15 years perfecting the ultimate ATV/UTV lift kit. The product? An easy-to-install, bolt-on lift that consistently measures truer over competitor products.

The High Lifter 2” Lift Kit relocates the shock mounts to provide additional lift making room for larger tires and tightens suspension. Each Lift Kit part is precision cut and zinc plated for durability and reliability in anyenvironment.

  • All hardware needed for successful installation is included
  • User-friendly instructions
  • Bolt-on application; takes approximately 1-2 hours for install
  • Zinc plated
  • Front and rear lift


Note: Fits Full Size models only!

Note: 1.5" spacers are recommended, but a minimum of a 1" wheel spacer is required on the front if you are running 12" diameter factory or aftermarket wheels for the wheel to clear the tie rod with the alignment cones installed. If you are running wide tires a 1.5" or wider spacer may be required depending on the width of the tire for tire to shock clearance at full lock steering.

Note: Be sure that you have our High Lifter forward a-arm kit that now includes our PSAK-1 alignment cone kit for 1/2" bolts. If you can install our HD Ranger Tie Rod Kit with no additional purchases.

Note: If you have upgraded or plan to upgrade to our Pro series tie rod/rack end kit you will need our part# (PSAK-1) alignment cone kit for 1/2" diameter bolts. Our (PSAK-1) alignment kit comes with 2- alignment cones and all of the hardware required to upgrade both sides of your Ranger and is used to help correct your tie rod angles.

Note: 1.5" spacers are recommended, but a minimum of a 1" wheel spacer is required on the front if you are running 12" diameter factory or aftermarket wheels for the wheel to clear the tie rod with the alignment cones installed. If you are running wide tires a 1.5" or wider spacer may be required depending on the width of the tire for tire to shock clearance at full lock steering.

Note: New aftermarket heavy duty CV axles are recommended for the 2011-2014 Ranger before installing any brand of lift kit. The 2011-2014 model Rangers have lighter duty rear axles than previous year models and are more prone to breakage. Be aware of these risks before installing a lift kit on a 2011-2014 Ranger, as high lifter will not warranty or replace any broken CV axles.

Other compatible numbers with the Kimpex part number:

  • PLK800R-50
  • 214399

Charts

X