RULE LoPro Series 900D Bilge Pump

RULE LoPro Series 900D Bilge Pump

Flow rate:

900 GPH


13.6 V


4 A



Hose included:





- +

There is not enough of this item in our online stock

Caution : Kimpex Canada ONLY sells and ships in Canada.

*Prices displayed on this web site are exclusive for online orders and might be different in store.

Part number :713017
Rule’s LoPro Series Bilge Pumps are only 2.25” high, but can move a mighty 900 gallons per hour. Each one features a threaded discharge nozzle with straight and 90° fittings, and the body can swivel up to 180°, making it a great fit for small spaces and odd configurations. - 900 gallon per hour capacity. The 900D can move a colossal 900 gallons of water per hour, even though it has an extremely low profile.
  • Fully rotating discharge body. The entire body swivels up to 180°, making the pump extremely easy to install.
  • Threaded discharge nozzle. The threads allow the discharge nozzle to couple with either a straight or 90° fitting, both of which are included. An included tricuspid check valve, used with the straight fitting, can be used to minimize the backflow of water.
  • Horizontal or vertical mounting. The 900D features a variety of mounting options to accommodate the boat’s design.
  • 12V DC operation. The pump operates on standard marine electrical power while delivering high capacity pumping power.
  • Voltage: 12VDC
  • Flow: 900GPH open flow at 13.6V
  • Amp Draw: 4A approx
  • Protection: TCO
  • Port Configuration: 3/4”, 1”, 1-1/8”
  • Straight, 90 degree 3/4”
  • Backflow preventer valve can be used with straight fittings
  • Height: 2.3”
  • Length: 7.6”

Other compatible numbers with the Kimpex part number:

  • LP900D
  • 713017